B5 Remote Control & A7 Remote Control

For all HD and Eplora DSTV Decoders ( new and old models) 

It might occur that your decoder gives weak signal or does not show picture for some public channels including DNCTV, on this case there can be 2 scenarios 

1. When you changed from old decoder to HD you did not change the LNB to suit HD decoder, in this case go to your nearest dealer to purchase new LNB and get a professional installer to do it for you ( for Explora the decoder comes with a new LNB to change the old one)

2. When you stay in an apartment /flats or condominium where many people share one dish it might compromise your signal, get a separate dish.

HD DSTv And Explora 

Decoder Settings

Blue DSTV button> 


Satellite Settings> 

Additional Settings> 

press Ok

(Make sure the following codes are all the same on Network 3)

Enable Network: Yes

Use NIT: Yes

Frequency: 12722

Modulation: DVB-S

Symbol Rate: 26657

FEC: 1/2

Polarisation: Vertical 

Go to scan all

Press Ok

(Once scanning is complete press the Blue DStv button. Go to planner.

TV Guide >all channels >press ok

Scroll down to find DNCTV

Leave your comments

Post comment as a guest

terms and conditions.